Modern plastics have become a part of our everyday lives. One can even go as far to say plastics consumption is a benchmark for measuring how developed a country is. According to Plastics – the Facts 2014/2015, a report published by PlasticsEurope, “...plastics materials have been key enablers for innovation and have contributed to the development and progress of society.”
Bulmachinery Enterprises Ltd. produces for the investment goods sector (mechanical and plant engineering), e.g. mining and mechanical engineering, power generation, cement and manufacturing industry, ferrous and non-ferrous metallurgy, crane construction and port facilities.
The factory building in Radomir, Bulgaria was constructed in the 1980s. This building was designed to meet the production requirements for the various industries and, to this day, its architecture remains unique in southeastern Europe.
After more than 35 years, leaks began to appear at different places on the roof. Once this state of affairs had worsened to the point that after «each rain there would be a couple days of more rain», as the foreman at «Bulmachinery Enterprises» put it, a complete renovation became urgently necessary.
Leister equipment is “good as gold” in Mongolia installation
In October 2013, two companies based in Ulaanbaatar, Mongolia, Bayan Airag Exploration LLC (a mineral exploration and development company), and Usny Erchim Co., Ltd (Leister Technologies’ official sales partner), found themselves at the Northwestern region of Mongolia collaborating on the Golden Hills Heap Leach Project.
Heap leaching is an industrial mining technique used when extracting precious metals―like copper, uranium, gold, and other compounds—from ore via a series of chemical reactions.
The ore is first crushed and then “heaped” into large piles on plastic sheets which protect the soil against contamination. Once the solvent (typically cyanide) seeps through the piles of material, and bonds with the metal contained therein, the solution is then collected at the bottom of leach tanks as an enriched solution and pumped to a mill where more chemicals are used to separate the cyanide from the valuable metals. Therefore, it is of extreme importance that those plastic layers are absolutely leak-proof.
Massive tanks are currently being built in Doha, Qatar. They each have a capacity of 150,000 m3 and will later supply the pre-planned town of Lusail with valuable potable water. To protect the poured concrete foundation which is at risk of corrosion from saline groundwater, special focus is placed on the sealant system. To this end, a special protective layer made of PE is inserted. On the side filled with concrete, nubs ensure that the protective layer is optimally anchored.
A customized automated machine has been developed
The difficulty when connecting the individual sheets in the protective liner is welding them rationally. Leister Technologies AG has developed a special automatic welder for this. The tried and tested hot wedge welder ASTRO was retrofitted so it runs smoothly between the nubs and can weld the overlapping sheets. The ASTRO CPL (Concrete Protection Liner) runs at 1.5 to 2 meters per minute over the 3 mm thick PE sheets. It connects the stiff PE material with its maximum contact pressure of 1500 N securely and without problems.
Customer Service Shines Bright in the Sunshine State
Similar to a catered event, projects are meticulously planned affairs that are prepared “a la minute,” or to the customer’s order. It can require a smorgasbord of collaborators that crosses datelines and cultures. An example of such an undertaking brought the teams, from Horequip and Leister, together to team up and serve Puff ‘n Stuff Catering with their newest location.
Tampa-based Puff ‘n Stuff Catering started as a small pastry shop in Trinidad in 1971. Since 2003—under the watchful eye of the founders’ son, Warren Dietel—Puff ‘n Stuff Catering has grown from a small pastry shop, to a large, full-service catering company who continues to win over its clients with its attentive service and exceptional cuisine.
Fourth Largest Coal-Fired Power Station in the World
Upon completion, the Kusile power station, located in the Mpumalanga district of South Africa, will become the fourth largest coal-fired power plant in the world.
This station, with a total capacity of 4,800MW, is part of the Eskom group (South African public electric utility) and will be the first power station in South Africa to install flue-gas desulphurisation (FGC) to remove sulphur oxides (SOx) from exhaust flue gases.
The search for the most environmentally-friendly solutions not only included the production of electricity itself (once the electricity will be running through the high voltage lines), but was also a concern long before the opening of the power station.
The floor covering of a room has a considerable effect on the people who live within it. Its function, material texture, as well as its color or pattern, are the factors which determine the level of quality of use.
The Better Choice
Resilient floor coverings no longer correspond to the dusty cliché of those depressingly functional wastelands they once used to be.
Modern floor coverings elegantly master the balancing act between functional requirements like hygiene, safety, appearance and cost-effectiveness, thus providing limitless possibilities to any creative interior designers
Swiss Federal Railways (SBB) was confronted with the torment of deciding on a suitable flooring, when renovation of the employees’ recreation and dressing facilities at the Lucerne site were due. The choice finally fell on a red, discreetly marbled PVC flooring, which was supposed to be laid from the entrance to the lounge area as well as the wet zones.
With over 40,000 square meters (430,556 square feet) of shade structure products, Egypt-based shade specialist, FTH-Industries, delivers standalone shade structures to schools for playground areas, sun covers, shade canopies for car parks and industrial shading structures.
FTH-Industries uses heavy-duty materials—HDPE fabrics as well as PVC tarpaulins—in their shade structures. Until recently, the traditional sewing application for large and heavy items, like tarpaulins, consisted of using rings to connect ends.
However, a problem often recurred when connecting more than one fabric roll to produce larger spans: To achieve reliable connections, the staff at FTH-Industries needed at least two sewing passes, which regularly resulted in lower outputs due to this time consuming procedure.
Another problem lay within the thickness of the PVC tarpaulins: For larger spans, 750 to 900 gram (22 - 26.5 ounce) material and higher were used. Now, imagine the difficulty of moving this weight through a sewing machine! Use of thick UV-treated threads did not make the job easier.
The Niayesh tunnel project is the largest ongoing civil engineering project in Iran. Tehran›s urban tunnel, 10,252 m long, is the second longest tunnel in Asia for auto traffic, after the Baotashan urban tunnel in China which is 10,480 m long.
Built in the shortest time
Two main traffic arteries on multiple levels including ramps and loops were built in Tehran. When the entire project is finished, the traffic situation in the Niayesh section of the city should be decongested and the primary traffic route along the east-west axis transferred. There is also the promise of «a positive change in the city and an improvement in the standard of living» (project text). The tunneling rate was 18.5 m per day and the entire volume an impressive one million m3 ! At times, 5000 people were at work on the project. For the main Niayesh tunnel, 245,000 m2 of geomembrane were built in, of those, 195,000 m2 were single layer PVC sheeting and 50,000 m2 HDPE geomembrane, both 2 mm thick. The entire geomembrane work here lasted only around six months.
The island of Saadiyat off the coast of Abu Dhabi in the United Arab Emirates is expanding to become a cultural center for locals and tourists. The "Louvre Abu Dhabi“, the first of several museums, will be constructed by 2015. The ambitious project from the French star architect Jean Nouvel will have a large white dome with a diameter of 180 meters that covers the building like a canopy of foliage. Since the entire complex will be in the water, the sealing system in the subsoil will be of significant importance.
Sophisticated system design
The Abu Dhabi Louvre will be surrounded by water. The grounds will not be flooded until after the completion of the construction. Therefore, protecting the cement foundation is the highest priority. To ensure water-tightness, a two-layered system was selected. A 1.6 mm thick Sikaplan on a TPO basis will be used as the lower geomembrane. The two meter-wide geomembrane is connected with the TWINNY S welder from Leister. This machine welds a double seam with its special nozzle. This way, after the welding process, the water-tightness can be tested in the groove created between the seams using a testing needle and compressed air.