250 Volt; 15+ Amp; 2-pole; 3-wire; grounding; twist-lock
Example: Hubbell HBL 4570CCN
This tool is single phase
When installing a plug:
Connect the green wire to the pin with the bent tab
Connect the white wire to one of the pins directly left or right of the bent tab
Connect the black wire to the other pin directly left or right of the bent tab
Screw down the wire contacts on to the bare electrical wire only and do not clamp down on the insulation of the wire. Bad contacts cause sparking which may cause the cord to heat up and may damage equipment.
Making an Extension Cord:
Use a 12 Gauge or thicker cable if you plan to make a 100 ft or longer extension cord
Equipment must be switched off before turning the generator on or off
When using a generator make sure the plug is wired for A/C
Recommended Generator Size:
PLEASE NOTE: Both our inbound shipping companies and our outbound couriers are currently advising all customers to expect delays with their parcel deliveries due to drastically increased volumes and the introduction of additional safety measures for their employees. These delays are completely out of our control and we appreciate your patience if they affect delivery of your package.