STANMECH Technologies Inc.
  • Home
  • Equipment Supply
    • Flooring
    • Geomembrane
    • Industrial Fabrics
    • Manufacturing
    • Plastic Fabrication
    • Roofing >
      • Distributors
  • Design Services
    • Design Services
    • Cosmetics
    • Deflashing Systems
    • Drying Bottles & Cans
    • Process Heat Systems
    • Shrinking Labels
  • Repair
    • Repair Service
    • Tech Tips
  • Resources
    • Articles
    • Case Studies
    • System Design Calculations
    • Whitepapers
  • About
    • About Us
    • Technology Providers
  • Contact

SARNAMATIC Tech Tips

4/18/2017

 
SARNAMATIC 661
  • Error 6 
    Occurs if the nozzle is in the welding position at power-up
    Also occurs if the power to the SARNAMATIC cuts out and comes back on while the tool is in use. Power will drop if there is a poor connection in the cord or plug, and due to overload or contaminated fuel when using a generator.

SARNAMATIC 641MC 
  • An error is displayed while the tool is cooling down 
    Answer: This is not a problem. Errors that come up while the SARNAMATIC is cooling down can be ignored.
  • Error 7 
    Occurs if the nozzle is in the welding position at power-up
    Also occurs if the power to the SARNAMATIC cuts out and comes back on while the tool is in use. Power will drop if there is a poor connection in the cord or plug, and due to overload or contaminated fuel when using a generator. 
  • Error 8
    Occurs if the heat is not turned off at power-up
    Also occurs if the power to the SARNAMATIC cuts out and comes back on while the tool is in use. Power will drop if there is a poor connection in the cord or plug, and due to overload or contaminated fuel when using a generator.

Comments are closed.
STANMECH Technologies Inc. 
​944 Zelco Drive Burlington ON L7L 4Y3 | 1-888-438-6324 | [email protected]
Terms of Use    Privacy    Terms and Conditions of Sale    Warranty Policies 
Français

Proud Member of:
IAGI Logo
International Association of Geosynthetic Installers
  • Home
  • Equipment Supply
    • Flooring
    • Geomembrane
    • Industrial Fabrics
    • Manufacturing
    • Plastic Fabrication
    • Roofing >
      • Distributors
  • Design Services
    • Design Services
    • Cosmetics
    • Deflashing Systems
    • Drying Bottles & Cans
    • Process Heat Systems
    • Shrinking Labels
  • Repair
    • Repair Service
    • Tech Tips
  • Resources
    • Articles
    • Case Studies
    • System Design Calculations
    • Whitepapers
  • About
    • About Us
    • Technology Providers
  • Contact