IGNITER BM4 / BR4 Ignition Blower

Request pricing

The IGNITER ignition blower from Leister has been specially designed for easy installation into pellet and wood chip stoves. 

• Heating element protection with phototransistor and device protection via temperature protection circuit
• Connector plug located directly on the tool means easy removal and installation
• New assembly support for positioning in furnace
• Connection adapter for air hose includes inner G1" thread, 38 mm external push-fit connection
• Available with pipe joint adapter with M14 thread for easy adaption of the heat conduction lines and extensions (available only for IGNITER BM4)

Technical Data

IGNITER		BM4	BM4	BM4	BM4	BM4	BR4
Voltage	V	120	120	230	230	230	230
Frequency	Hz	50 / 60	50 / 60	50 / 60	50 / 60	50 / 60	50 / 60
Power Consumption	W	1100	1550	600	1100	1600	3400
Min. air volume	l/min 20°C	230	230	80	230	230	360
Air pressure	kPa	2.48	2.48	0.3	2.48	2.48	4.00
Max. temperature	°C	600	600	500	600	600	650
Noise level	dB (A)	68	68	58	68	68	68
Heating tube	mm	Ø 31.5	Ø 31.5	Ø 31.5	Ø 31.5	Ø 31.5	Ø 50.0
Size (L x W)	mm	283 x Ø90	283 x Ø90	283 x Ø90	283 x Ø90	283 x Ø90	294 x Ø90
Weight	kg	1.0	1.0	1.0	1.0	1.0	1.2
Approval markings		CE, cURus	CE, cURus	CE, cURus	CE, cURus	CE, cURus	CE
Electrical protection		Class II	Class II	Class II	Class II	Class II	Class II

Installation Dimensions in mm

Part Numbers

Note: Plug for cable connection and cable are not included. See accessories below for part numbers. 
141.882: IGNITER BM4 - 120V / 1100W
141.881: IGNITER BM4 - 120V / 1550W
139.232: IGNITER BM4 - 230V / 600W
140.711: IGNITER BM4 - 230V / 1100W
144.012: IGNITER BM4 - 230V / 1100W with M14 screw adapter
139.231: IGNITER BM4 - 230V / 1600W
​146.296: IGNITER BR4 - 230V / 3400W

Download Operating Manual

Accessories for IGNITER BM4 / BR4

	142.967 143.131	Power supply cord (rubber) with WAGO plug 3 x 1 mm2 x 3 m Power supply cord (silicone) with WAGO plug 3 x 1 mm2 x 3 m
	142.976 148.429 (BR4)	Plug with strain relief, kit (WAGO 770) cable Ø 4.5 - 8 mm Plug with strain relief, kit (WAGO 770) cable Ø 8 - 11.5 mm
	142.414	Accessory screw adapter for M14 extensions (BM4 only)
	153.245	Stainless steel filter kit (Ø 38 mm), push-fit on air intake
	107.286	Air hose Ø 38 mm / Ø 1.5 in.
	107.287	Hose clamp
	142.717 150.871 150.872 142.718 150.873 145.606	Heating element for IGNITER BM4 230V / 1550W BM4 230V / 1050W BM4 230V / 550W BM4 120V / 1500W BM4 120V / 1050W BR4 230V / 3300W

Back to:  Manufacturing Equipment