UNIPLAN Tech Tips

Symptom: Bad welds or low air volume

• Check that the air intake at the blower handle is clear of dust and debris. Clean it with a soft brush to remove any blockage.
• Check the air slide at the air intake. Turn it clockwise for more heat or counter-clockwise for more air volume.

Wiring Instructions
Connecting a plug:

• Connect the green wire to the ground pin
• Connect the white wire to either remaining pin 
• Connect the black wire to the last pin

Please consider the following when making an extension cord for your UNIPLAN:

• Use a 10 Gauge or thicker cable if you plan to make a 100 ft or longer extension cord