COMET Tech Tips

COMET Wiring Instructions
Please consider the following when connecting a new plug to your COMET:

• Specifications of the plug: 15 Amp; 250 Volt; 2 pole; 3 wire; grounding; twist-lock

Connecting a twist-lock plug:

• Connect the green wire to the pin with the bent tab
• Connect the white wire to one of the pins directly left or right of the bent tab
• Connect the black wire to the other pin directly left or right of the bent tab

Please consider the following when making an extension cord for your COMET:

• Use a 12 Gauge or thicker cable if you plan to make a 100 ft or longer extension cord

Generator Instructions:

• Starting procedure:
  1. Switch on the generator
  2. Switch on the COMET
• Shut-down procedure:
  1. Switch off the COMET
  2. Switch off the generator