UNIROOF AT/ST Automatic Welders
|
|
The new UNIROOF AT/ST roof welder is your flexible partner for welding thermoplastic roofing membranes on flat or pitched roofs up to 30°. Weld close to the edge, on the parapet, or close to obstacles thanks to the UNIROOF's slim design.
- Movable transport axle and slim design allow welding as close as 100 mm from obstacles or on top of parapets
- Maintenance-free, brushless drive motor integrated into the pressure wheel provides higher pressure and welding speed while reducing maintenance
- Field tested design for ergonomic handling, flexible relocating, and optimal machine guiding
- For materials up to 1.8 mm thick
- UNIROOF AT: Closed-loop controlled temperature, drive motor, and air blower mean stable results even with voltage fluctuations
- UNIROOF AT: Functional control panel with display for welding parameters (set point and actual figures during runtime) as well as voltage for better control
- UNIROOF ST for purists: Closed-loop controlled drive motor with open loop technology for control of the temperature and air blower. Simple control with potentiometers/rotary knobs.
Why Buy From Us
The UNIROOF is available in Canada only through STANMECH's distributor network. Tools bought through us are electrically certified for use in Canada. In many cases this entails replacing cords or switches in the tool to meet stringent CSA standards. Each tool is physically inspected by an approved field inspector prior to certification. We offer same-day shipping on in-stock items and service everything we sell from our facility in Burlington, Ontario, Canada.
Technical Data
UNIROOF AT |
UNIROOF AT |
UNIROOF ST |
UNIROOF ST |
||
Voltage |
V |
120 |
230 |
120 |
230 |
Power Consumption |
W |
1800 |
3450 |
1800 |
3450 |
Temperature |
°C |
100 - 620 |
100 - 620 |
100 - 620 |
100 - 620 |
Air flow range |
% |
45 - 100 |
45 - 100 |
45 - 100 |
45 - 100 |
Air flow |
l/min. |
225 |
225 |
147 |
147 |
Drive speed |
m/min. |
1.0 - 10.0 |
1.0 - 10.0 |
1.0 - 10.0 |
1.0 - 10.0 |
Control |
Closed-loop with display |
Open-loop with potentiometers |
|||
Blower |
Brushless motor |
Brushless motor |
Brush motor |
Brush motor |
|
Welding seam |
mm |
40 |
40 |
40 |
40 |
Dimensions |
mm |
474 x 244 x 265 |
474 x 244 x 265 |
474 x 244 x 265 |
474 x 244 x 265 |
Weight |
kg |
17.5 |
17.5 |
17.5 |
17.5 |
Approval markings |
|
CE, QPS |
CE, QPS |
CE, QPS |
CE, QPS |
Electrical protection |
|
Class I |
Class I |
Class I |
Class I |
Part Numbers
153.598: UNIROOF AT - 230V / 3450W
153.599: UNIROOF AT - 120V / 1800W
153.600: UNIROOF ST - 230V / 3450W
153.601: UNIROOF ST - 120V / 1800W
153.599: UNIROOF AT - 120V / 1800W
153.600: UNIROOF ST - 230V / 3450W
153.601: UNIROOF ST - 120V / 1800W
Leister How-to Videos
Accessories
![]() |
155.325: Grip nozzle, 40 mm For roughening and welding of TPO single plies |
![]() |
152.742: Additional weight, front 152.741: Additional weight, lateral |
![]() |
155.577: Locking plate for additional weights |
![]() |
154.462: Nozzle calibration device |
![]() |
132.429: 2 welding plates for optimum welding starts |
![]() |
138.817: Steel brush to clean nozzle |
![]() |
154.522: Transportation axle 300 mm |
![]() |
152.706: Transportation axle 220 mm for radius welding |
![]() |
138.314: Seam probe tester |
![]() |
111.346: Edge plane with 10 spare blades 111.348: 10 spare blades for edge plane |
![]() |
137.855: Leister knife with four blades 138.902: 10 spare blades, hook shape 138.539: 10 spare blades, trapezoid shape |
![]() |
154.827: Storage case |
![]() |
155.473: Element for UNIROOF AT/ST, 230V / 3300W 153.947: Element for UNIROOF AT/ST, 120V / 1800W |
Back to: Roofing Equipment