TRIAC DRIVE Semi-Automatic Welder
|
|
|
|
This tried and tested semi-automatic hot air welder can be used for vertical or horizontal hot air welding. The increased welding speed compared with manual welding means higher productivity.
- Overlap welding of any thermoplastic material
- Faster and more efficient than hand welding
- Small and compact
- Fully adjustable speed
- Automatic shut-off when carbon brushes reach their wear limit to avoid expensive armature damages
- Built-in electronics provide superior temperature control and heating element protection
- Can be used in the most confined spaces
- Closed-loop temperature control (TRIAC DRIVE AT only)
Why Buy From Us
The TRIAC DRIVE for roofing is available in Canada only through STANMECH's distributor network. Tools bought through us are electrically certified for use in Canada. In many cases this entails replacing cords or switches in the tool to meet stringent CSA standards. Each tool is physically inspected by an approved field inspector prior to certification. We offer same-day shipping on in-stock items and service everything we sell from our facility in Burlington, Ontario, Canada.
Technical Data
| Voltage | V | 120 | 230 |
| Frequency | Hz | 50 / 60 | 50 / 60 |
| Power Consumption | kW | 1.7 | 1.7 |
| Temperature | °C | 20 - 700 | 20 - 700 |
| Speed | m/min. | 0.5 - 3.0 | 0.5 - 3.0 |
| Weld width | mm | 38 | 38 |
| Noise level | dB | 65 | 65 |
| Size (L x W x H) | mm | 300 x 230 x 380 | |
| Weight | kg | 4.1 | 4.1 |
| Approval markings | CE, QPS | CE, QPS | |
| Electrical protection | Class II | Class II | |
Part Numbers
115.125: TRIAC DRIVE ST - 120V / 1.6kW 38 mm outside nozzle without grip
115.379: TRIAC DRIVE ST - 120V / 1.6kW 38 mm inside nozzle without grip
Other versions available upon request.
115.379: TRIAC DRIVE ST - 120V / 1.6kW 38 mm inside nozzle without grip
Other versions available upon request.
Accessories
 |
115.176 115.712 115.857 115.921 |
Pressure roller 30 mm, steel 40 mm, steel 30 mm, silicone 40 mm, silicone |
 |
115.284 | Guide handle |
 |
115.276 115.275 |
Single supporting carrier Double supporting carrier |
 |
115.281 115.279 115.703 115.701 |
Overlap welding nozzle, inside, push-fit with grip, 38 mm with grip, 30 mm without grip, 38 mm without grip, 30 mm |
 |
115.280 115.278 115.702 115.700 |
Overlap welding nozzle, outside, push-fit with grip, 38 mm with grip, 30 mm without grip, 38 mm without grip, 30 mm |
 |
138.549 | Guide aid for horizontal welding |
 |
108.985 | Storage case |
Back to: Roofing Equipment
