Changing the element on a VARIMAT
Correct the nozzle position on a VARIMAT
Working with generators
Symptom: The VARIMAT does not start driving when the ELECTRON is placed in the weld position, or it starts briefly and then stops driving.
Symptom: The VARIMAT suddenly turns off and on, or does not turn on at all
Symptom: Temperature is not steady, it floats up and down
Symptom: The VARIMAT V displays the desired temperature but fails to reach the desired temperature
Symptom: Bad tracking, membrane burns, folds
The lock pin may snap if shock or extreme pressure is put upon the ELECTRON blower while it is locked in the upper position.
VARIMAT Wiring Instructions
Please consider the following when connecting a new plug to your VARIMAT:
Connecting a twist-lock plug:
Please consider the following when making an extension cord for your VARIMAT:
This section is designed to provide our customers with some quick tips for common problems they may encounter with their tools. Our tips come straight from John Wesselson, our repair technologist, or from customers who submit them for inclusion on our website.