UNIFLOOR Tech Tips

Symptom: Bad welds or low air volume 

• Check that the air intake at the blower handle is clear of dust and debris. Clean it with a soft brush to remove any blockage.
• Check the air slide at the air intake. Turn it clockwise for more heat or counter-clockwise for more air volume.

UNIFLOOR Wiring Instructions - 120V tool only
Plug specifications: 125V; 15A; 2-pole; grounded; male
Connecting a plug:

• Connect the green wire to the ground pin
• Connect the white wire to either remaining pin
• Connect the black wire to the last pin

When making an extension cord for your UNIFLOOR use a 10 Gauge or thicker cable if you plan to make a 100 ft or longer extension cord.

Generator Instructions:

• Starting procedure:
  1. Switch on the generator
  2. Switch on the UNIFLOOR
• Shut-down procedure:
  1. Switch off the UNIFLOOR
  2. Switch off the generator