TRIAC DRIVE Semi-Automatic Welder
|
|
|
|
This tried and tested semi-automatic hot air welder can be used for vertical or horizontal hot air welding. The increased welding speed compared with manual welding means higher productivity.
- Overlap welding of any thermoplastic material
- Faster and more efficient than hand welding
- Small and compact
- Fully adjustable speed
- Automatic shut-off when carbon brushes reach their wear limit to avoid expensive armature damages
- Built-in electronics provide superior temperature control and heating element protection
- Can be used in the most confined spaces
- Closed-loop temperature control (TRIAC DRIVE AT only)
Why Buy From Us
The TRIAC DRIVE is available in Canada only through STANMECH and our distributor network. Tools bought through us are electrically certified for use in Canada. In many cases this entails replacing cords or switches in the tool to meet stringent CSA standards. Each tool is physically inspected by an approved field inspector prior to certification. We offer same-day shipping on in-stock items and service everything we sell from our facility in Burlington, Ontario, Canada.
Technical Data
Voltage |
V |
120 |
230 |
Frequency |
Hz |
50 / 60 |
50 / 60 |
Power Consumption |
kW |
1.7 |
1.7 |
Temperature |
°C |
20 - 700 |
20 - 700 |
Speed |
m/min. |
0.5 - 3.0 |
0.5 - 3.0 |
Weld width |
mm |
38 |
38 |
Noise level |
dB |
65 |
65 |
Size (L x W x H) |
mm |
300 x 230 x 380 |
300 x 230 x 380 |
Weight |
kg |
4.1 |
4.1 |
Approval markings |
|
CE, QPS |
CE, QPS |
Electrical protection |
|
Class II |
Class II |
Part Numbers
115.125: TRIAC DRIVE ST - 120V / 1.6kW 38 mm outside nozzle without grip
115.379: TRIAC DRIVE ST - 120V / 1.6kW 38 mm inside nozzle without grip
Other versions available upon request.
115.379: TRIAC DRIVE ST - 120V / 1.6kW 38 mm inside nozzle without grip
Other versions available upon request.
Accessories
 |
Pressure roller 115.176: 30 mm, steel 115.712: 40 mm, steel 115.857: 30 mm, silicone 115.921: 40 mm, silicone |
 |
115.284: Guide handle |
 |
115.276: Single supporting carrier 115.275: Double supporting carrier |
 |
Overlap welding nozzle, inside, push-fit 115.281: with grip, 38 mm 115.279: with grip, 30 mm 115.703: without grip, 38 mm 115.701: without grip, 30 mm |
 |
Overlap welding nozzle, outside, push-fit 115.280: with grip, 38 mm 115.278: with grip, 30 mm 115.702: without grip, 38 mm 115.700: without grip, 30 mm |
 |
138.549: Guide aid for horizontal welding |
 |
108.985: Storage case |
Other Tools
GEOSTAR G5/G7 Wedge Welder
The GEOSTAR wedge welder is the fastest Leister wedge welder available with a top welding speed of 12 m/min, depending on conditions. |
TRIAC ST Hot Air Hand Tool
The new TRIAC ST from Leister is the seventh generation of the revolutionary TRIAC family of tools. Easy to use, output is controlled via a rotary knob just like the TRIAC S. |
TRIAC AT Hot Air Hand Tool
The TRIAC AT offers the advantages of closed-loop temperature control, independent air flow control, and a digital display. |
Back to: Geomembrane Equipment
