|
|
|
|
SARNAMATIC Family Tips
General
-
An error is displayed while the tool is cooling down
Answer: This is not a problem. Errors that come up while the SARNAMATIC is cooling down can be ignored.
SARNAMATIC 641MC
-
Error 7
Occurs if the nozzle is in the welding position at power-up
Also occurs if the power to the SARNAMATIC cuts out and comes back on while the tool is in use. Power will drop if there is a poor connection in the cord or plug, and due to overload or contaminated fuel when using a generator.
-
Error 8
Occurs if the heat is not turned off at power-up
Also occurs if the power to the SARNAMATIC cuts out and comes back on
while the tool is in use. Power will drop if there is a poor connection
in the cord or plug, and due to overload or contaminated fuel when using
a generator.
Still have questions? Send them to us via
info@stanmech.com
or call us at 905-631-6161.
Have a tip you've found useful? Let us know!
Submit a tech tip for inclusion on our website
.
|
|